[ad_1]
This wooden serving board was a diamond within the tough.
I discovered this wooden serving board at TJMax for $6 and I cherished the form, however wasn’t a fan of the engraved flowers (or the pen drawing on it). I used to be fairly positive that, with some elbow grease, I’d have the ability to sand the engraving out of the wooden. So I introduced it dwelling to provide it a attempt. It took somewhat extra work than I used to be anticipating, however it labored! And now I’ve a easy, minimal serving board, within the good form with out the flowers.
This could be an awesome venture to attempt with thrift retailer finds as effectively, so click on via in order for you extra particulars on how I sanded it down, what I instruments I used, and so on.
Wooden Serving Board DIY
Serving boards like this one, which might be thick, are normally fairly costly. So after I noticed the value, I jumped on it, type of.
I virtually didn’t make it to the checkout bc I began wavering on whether or not I’d have the ability to sand down the engraving (it was fairly deep). And I didn’t need to waste it if it didn’t work out. However then I satisfied myself it was doable and headed dwelling to provide it a attempt.
Listed below are the instruments I used…
That’s it! I linked on to the precise sander I used, in case that’s useful for you. We’ve a number of sanders and this one is probably the most highly effective, that now we have. Nice for tasks like this that require eradicating an excellent quantity of fabric.
One final thing to notice earlier than you get began: You’ll additionally must discover a work floor to make use of for sanding. So maintain that in thoughts. You probably have one thing freestanding that you may transfer round outdoors, that may be splendid. As a result of except you’ve got an attachment to your sander then vacuums up all the noticed mud, it’s going to be a messy course of.
How I eliminated the engraving from the wooden
I arrange a piece floor outdoors (we use a Bora centipede that folds up) and clamped the wooden serving board to the desk as tightly as I might get it.
Then, connect the sanding disc to your sander and get to it. Relying on how deep the engraving is, you could be sanding for some time. For those who’re simply coping with eradicating floor scratches, pen marks, and so on it received’t take however a couple of minutes. However for a deep engraving like mine, it’s going to take extra effort. I can’t bear in mind precisely how lengthy I truly spend sanding, however it was below half-hour for positive. So nonetheless not that lengthy contemplating.
Notice on sanding: Though the engraved design was solely on the backside of the serving board, I needed to sand your entire floor. To keep away from having an uneven floor ultimately.
As soon as the sanding is full. Wipe it down and use reducing board oil (wiped on with a rag or outdated t-shirt) everywhere in the board to provide it a pleasant seal. Let it dry (I might say at the least 24 hours to be secure) after which it’s prepared to make use of.
You need to use the completed piece as a reducing board or a serving board. Simply be sure you re-oil the board each time it begins to dry out. Which might normally be simply a couple of times a 12 months.
Wooden Serving Boards to Purchase
And for those who’ve gotten this far and are saying to your self, eh I don’t know if I need to put within the effort, I’ve you coated. Listed below are some lovely wooden serving boards that you simply received’t need to DIY bc they’re good as is.
reyes reducing board $14 – such an excellent value!
2 piece wooden reducing board set $20
spherical serving board $17 – drill a gap within the prime for a lux look
tikal wooden serving board $125 (is available in 2 colours)
easy wooden arch reducing board $85
rubber wooden serving board $20
Searching for extra serving board / reducing board inspiration? Test these out…
[ad_2]
