How you can Elevate Up A Brief Vainness

Comply with alongside on this tutorial for find out how to elevate up a brief self-importance to provide it some additional peak (and reuse the present countertop). 

Major Toilet Rework:

How you can Elevate Toilet Vainness Peak

This publish accommodates affiliate hyperlinks. Study extra and browse our full disclosure coverage right here.

On this tutorial we share find out how to give your self-importance a trendy replace for taller people, by elevating the peak of the counter on your complete self-importance in just a few actually easy steps, no want for a plumber!

In our renovate-and-move story, we’re headed again to the grasp lavatory!  We had solely a few week to transform, and no actual cash to talk of, which meant we wanted to work with the present self-importance, however I had ONE principal concern… the sink peak.

You in all probability haven’t met me in particular person however I’m tall (you will get to know me somewhat by studying these private historical past posts – shameless plug) or considerably tall for a woman, I’m 5’10”. So, the dinky 30 inch excessive commonplace lavatory counters haven’t any place in my grasp lavatory.

In our final (final) home we mounted this concern by constructing a tall open desk self-importance for our grasp tub which gave us a consolation peak degree of like 36″.

And I actually needed to do this once more, I had the plans all drawn out however with the time crunch of our eminent transfer, I simply needed to make do with what we had…

However I couldn’t make do with a 30″ inch counter… It simply didn’t a major lavatory make.

Nicely, just a few years in the past I noticed an concept on the Nester’s web site excessive heels on your self-importance!  I used it to assist my pal do that on her lavatory just a few years in the past, and it was lastly my flip to attempt it out.

How you can Elevate Up A Brief Vainness Tutorial

Right here’s what the grasp lavatory and commonplace peak self-importance seemed like earlier than we raised the peak of the self-importance (plus just a few different tasks, in fact!)

Dimension of the Vainness: A normal lavatory self-importance is roughly 30″ tall (the peak of your lavatory self-importance) and roughly 19″ deep, width will range on the product itself and variety of sinks, and if the home was a customized constructed challenge.

There are increasingly vanities commercially accessible which have larger countertop heights, however in case you are working with an present self-importance, likelihood is that’s your commonplace in relation to builder grade lavatory cabinetry.

Once we first moved into the home there was carpet on the ground (yuck!) The second we closed on the home, and I imply the minute it was lastly signed, I went into the toilet and ripped it out.

In the interim (which ended up being your complete time we lived there…) I painted the ground and hung some drapes because the 6′ x 4′ window was conveniently situated proper subsequent to the entrance door. Subsequent time we’ve a minute we will speak about silly floorplans.

We did lastly get the ground tiled with a stupendous ceramic tile and we wrote a publish about tiling ideas for flooring. I obtained grout on the cupboards whereas tiling, and wiped it off with the grout cleansing sponge… oops, don’t do that- there may be your first tip!

How you can Elevate Toilet Vainness Peak!

Step 1: Take away the Mirror and Backsplash

First, we eliminated the mirror, because it was resting on the counter We’re planning on reusing the mirror so we have been cautious when dealing with it. 

Then we pried off the facet backsplash with a pry bar. We additionally eliminated this rigorously in order that it wouldn’t break, in case we needed to place it again, but additionally to maintain from ripping up the wall board or breaking a gap into the drywall.

Step 2: Take away the Vainness Countertop

Subsequent, it was time to take away the self-importance high/lavatory sink. So, we turned off the water provide on the sink valves, loosened the nut hooked up to the p-trap drain pipes below the sinks, and indifferent the water strains to the taps.

At this level we have been capable of take away the counter high. Fortunately, the toilet countertop was not glued all the way down to the toilet self-importance cupboard. It was very easy to take away. Heavy although! Keep in mind to carry along with your legs!!

For the reason that strong floor was an honest colour and in good condition, so we saved it to reinstall.

If you wish to change yours, however the unique is in respectable form, make sure to see if you happen to can donate your outdated counter to an area Habitat ReStore. Certainly one of my greatest pet peeves about reworking is the blatant waste of excellent product that may very well be re-used particularly for folks on a good price range.

All prepared for elevating the roof!  I imply the countertop, nicely virtually. In the meantime:

Storing space in the course of the building.  Sorry little bathtub.

We eliminated the bathroom as nicely to not should work round it whereas tiling.  (by the way in which it was sitting on a board, not simply on the bathtub, that might be gross!!)

Step 3: Degree the Cupboard Tops

We will probably be constructing a body to sit down on high of the present cupboards.

I wanted the highest of the present cupboard to be flush for the raised portion.

For the reason that cupboard was only a inventory builder grade, the corners had these low-cost helps stapled in to maintain it sq.. This will or is probably not the case in your cupboard, however whether it is, you will have to take away the tab.

I didn’t need to take away the nook helps however, I did reduce off the lip within the entrance make a degree spot for the brand new apron we have been including to the cupboard. This manner there wasn’t a big hole.

So, I simply reduce off the a part of the nook brace that hung over the sting with a razor blade.

The entrance of the cupboards are vital to maintain flush.

Additionally an apology for the unusual colour change within the subsequent photos, it’s so a lot tougher to get correct photos at evening with incandescent bulbs.  However with little ones we are sometimes working across the clock, sleep time is vital work time!

Step 4: Construct and Connect New Body

The brand new body to boost the peak of the cupboards was very easy to construct.

Provides:

• 1×6 choose pine in size of cupboard plus 2-3 depth measurements of the cupboard (or oak or no matter matches your cupboards)
• 1×2 or 2×2 low-cost pine again wall blocking in size of entrance of cupboard
• Kreg Jig
• Screws

Have a look at your present cupboard design, we used the body of ours because the foundational form for the braces we made.

Constructing The Body for the New Apron:

1. Begin by slicing the entrance piece or apron of strong 1×6 choose pine to the precise size of the face of your cupboard.
2. Measure the depth of the cupboard from the again wall to entrance of cupboard and subtract the width of the 1×6 entrance board (normally 3/4″) however test the boards you might be utilizing to make sure. that’s the size of the depth boards.
3. The entrance apron is Kreg jigged (pocket gap screwed) to the present cupboard. I used pocket gap screws to connect the entrance apron to the center brace, and sides as nicely from behind, which left no holes within the entrance.
4. The facet and center braces have been additionally pocket gap screwed all the way down to the cupboard base.  This created a really robust maintain with no glue. Nevertheless you can sue glue if desired.
5. Lastly, I added braces to the again wall, (the 1×2 or 2×2) to assist assist the burden of the countertop.  They’re simply screwed into the studs within the wall between the edges.

If you happen to don’t have a kreg jig, you can use 2×2 blocks within the nook joints the place the wooden meets screwing from behind into the entrance face frames for a powerful construction and no holes. Simply make sure your screws aren’t too lengthy that the stick out of the entrance body of the wooden.

Right here is the completed framing platform for the brand new countertop. We adopted the strains of the present cupboard to provide countertop assist in all the identical spots. Technically this provides a bit extra cupboard space within the physique of the cupboard, however not technically because you gained’t be capable to entry it.

Step 5: Add Trim & Aspect Panel (elective)

On the entrance of the cupboard, after including the brand new apron there was a small seam.

We added a small molding to cowl the seam. We determined to wrap that molding across the edge for a cohesive look, as soon as we obtained the brand new facet board on.

You possibly can additionally fill with bondo or an epoxy resin filler, and sand down, however that may solely work if you happen to plan to color the wooden (which we additionally did).

Apron Entrance Choices:

• Fake Drawers Look: Screw a further piece of 1x wooden from behind by way of the apron. I’d make them the identical width because the door beneath them (or the size of the set of drawers beneath) You possibly can add new {hardware} – pulls or knobs to finish the look. Would look greatest if the perimeters of the piece of wooden are routed much like the sting type of the present cupboard doorways.
• Molding Fake Drawer Fronts – you can create a rectangle that appears like a drawer entrance hooked up on entrance.
• Wooden applique designs: add carved wooden appliques to create a focus or curiosity.
• Cowl the Hole with small molding (like we did above)
• Depart plain – technically you don’t even have to cowl the hole whether it is sufficiently small to not be obtrusive.

Aspect Panel (elective)

Technically if I have been to do that challenge over, I’d not have added this facet panel, however the present facet panel was somewhat beat up so we selected to cowl it. There was a face body hole of a few 1/4 inch so the panel did fill that area up properly.

Notice: The face body of the cupboard hangs over the sting a few quarter of an inch.  This helps builders screw the cupboards collectively with out gaps, however it made it exhausting to wrap the entrance molding across the edge. 

So we determined to simply cowl the facet.  We had a left over piece of bead board from the playhouse,  we didn’t reduce out the kick area, as a result of in a while we determined so as to add legs.

Step 6: Substitute the Taps

We determined to put in new taps, so we eliminated the outdated ones fully. They have been BAD!  Fortunately we have been capable of get two of those on sale!

One fast assist to putting in the taps is getting them on the counter earlier than placing it on. Whereas the counter will not be hooked up you possibly can connect the brand new faucet actually simply, earlier than you set it in place.

Step 7: Reinstall Countertop and Sink

We selected to reuse our countertop which was an honest plain colour and solely 10 years outdated.

Changing the Countertop:

In relation to changing your countertop in case you have an outdated countertop that’s in unhealthy form you possibly can take into account shopping for a brand new one.

The scale of your self-importance base ought to decide the countertop measurement.

At Dwelling Depot or Lowes they’ve some commonplace sizes premade and accessible in retailer – typically. I’d not depart this for final minute, make sure to test the shop earlier than beginning the challenge in case you have to order one prematurely.

Some countertop choices for loos: (if you wish to get a customized countertop make sure to name some native stone countertop sellers and ask for left over scraps or remnant items, which can be large enough for a bathroom- however a greater deal for you!)

• Marble Countertop (can scratch simply and stain – if this a toilet for teenage ladies, might need to steer clear!)
• Granite Countertop – don’t overlook to maintain pure stone merchandise sealed
• Quartz Counter tops (we had these put in in our present home’s household lavatory and I really like them! No sealing- proud of the sturdiness!)
• Concrete – DIY model tutorial! (or attempt Ardex over and present countertop.)
• Formica – technically these are available kitchen counter depths (24″) so for a loo it will must be reduce down- within the again. Nevertheless that is an possibility in case you are in a rush and want some factor in-stock on the retailer. It will likely be within the kitchen part.
• Butcher block – if sealed correctly and maintained
• Stainless-steel counter tops
• Copper Counter tops

You may both re-attach the counter by screwing into present blocking, which this counter didn’t have. OR you possibly can add a bead of liquid nails to the highest of the cupboard body to carry the countertop safely in place. As soon as the plumbing is reattached that can even assist to carry the counter in place.

As soon as we set the counter in place it was time to reattach the plumbing, which included the drain on the backside of the bowl and the p-trap and reattaching the water provide pipes.

That is a lot nicer to clean palms in. No extra bending over and breaking my again.

When putting in the sink, make sure to add plumbers putty for a water tight seal.

Aside from that, for the taller counter the one additional piece of plumbing you will have is a tailpiece extender to achieve the p-trap after the counter was raised.

(Nevertheless in case your water strains from the tap to the valves aren’t lengthy sufficient you might have to exchange these, Simply FYI, ours have been tremendous…)

Since it is a grasp lavatory, I feel it’s superior that the children have to make use of a stool to get to the tap, appropriately… No extra stooping down for Mother and Dad. 

Cute little helpers couldn’t keep away.  They only love water.

Step 8: Paint

All prepared for paint.  EXCITED! EXCITED! (stated like Steve the monkey! from Cloudy with a Likelihood of Meatballs)

And apparently, we forgot to take another intermediate photos.

In the end I needed this lavatory self-importance makeover to to look extra customized like a chunk of furnishings and add some taller legs or toes to the kickplate area.

We might the legs from simply 1x 4’s inventory wooden scraps. In the end whereas I like the thought of the brand new look I made just a few errors.

Principal mistake: I painted the kick area black, I remorse it now, I don’t love the way it turned out, however oh nicely, reside and be taught! Study from me and don’t do that… white would have seemed so significantly better. Or only a darkish impartial tone, not so stark.

I additionally actually needed to make use of extra thrilling legs, however since cash was brief, we simply went with a left over 2 x 1, however subsequent time…!

 Nicely what do you concentrate on our raised sink?

Did it provide the guts to attempt it at your personal home!

It’s so price not stooping ten toes to brush your tooth, it’s so luxurious!   It’s simply these little issues that make such a giant distinction! I hope the brand new house owners like it and get to benefit from the completed area that we by no means had!

You can too see how we framed the mirror and tiled the ground and the hyperlinks.

Associated