[ad_1]
![](https://www.brepurposed.com/wp-content/uploads/2023/03/shelf-with-wood-gallery-rail.png)
We’re within the midst of a bit of laundry room refresh and I’ve been slowly finishing initiatives to replace this area. We completed it nearly 7 years in the past and it’s probably the most used rooms in our dwelling (after the kitchen). However now that we have now 3 kiddos and my model has advanced it’s time for some adjustments! My most up-to-date venture was constructing a shelf with a wooden gallery rail and I’m right here to share all the small print with you!
![How to Build a Wood Gallery Rail Shelf](https://www.brepurposed.com/wp-content/uploads/2023/03/how-to-build-a-wood-gallery-rail-shelf-3.png)
Once we first accomplished the laundry room, we put a shelf on the wall above the washer and dryer that was round 5′ lengthy. I don’t know why I made a decision on that size or why I didn’t lengthen all of it the way in which throughout the wall. It was early in my design journey and the laundry room was the primary room I ever designed from prime to backside!
![](https://www.brepurposed.com/wp-content/uploads/2019/01/modern-casual-laundry-room-1.jpg)
The extra I checked out it, it simply appeared unbalanced and there was extra room for added storage and performance. So I got here up with the concept to create a shelf with a wooden gallery rail on prime and a dangling brass rail on the underside.
I used to be impressed to create the wooden gallery rail after making a pet food holder for Oakley out of bigger wooden spindles. Brass gallery rails have develop into tremendous in style in design – we have now one in our kitchen and I adore it – however I wished to place a special spin on it. Plenty of older antiques have this aspect which is such a stupendous element, and I wished to do it in a extra fashionable manner that match my model higher.
SUPPLIES FOR SHELF WITH A WOOD GALLERY RAIL
STEP 1
Drill the holes on your finials. You’ll need to measure out your spacing first – I spaced mine 2.5″ aside from each other however you are able to do no matter appears to be like finest to you! I positioned them about 1/2″ from the entrance fringe of the board.
![DIY Shelf with Gallery Rail](https://www.brepurposed.com/wp-content/uploads/2023/03/diy-shelf-with-gallery-rail.png)
To drill the holes I used a 5/8″ drill bit. You could possibly additionally use a spade bit however since these have a sharp finish, I didn’t need to danger drilling by means of the wooden!
STEP 2
Trim the highest a part of the finials off. It was pretty simple to drill into the shelf board, however drilling into the nook spherical can be actually difficult. So to keep away from this, I simply trimmed off the highest a part of the finials in order that the nook spherical may sit flat.
I used the band noticed to do that and it was so fast and simple! If wanted, you’ll be able to then sand down the tops for a totally easy floor.
STEP 3
Minimize and miter your nook spherical. It helps to put your finials within the holes to get a greater thought of the place the nook spherical will sit. Then you should utilize your mitre noticed set at a forty five° to chop every bit.
![Building a Shelf with a Wood Gallery Rail](https://www.brepurposed.com/wp-content/uploads/2023/03/how-to-build-a-shelf-with-a-wood-gallery-rail.png)
STEP 4
Drill the holes in your corbels. You probably have a drill press that’s the best manner to do that, however we don’t so I used some clamps and my common drill. The copper pipe I used for the “brass rail” is 1/2″ and I used a 5/16 spade bit for the holes.
I stained my corbels first, however I counsel drilling first after which staining!
![DIY Shelf with Corbels](https://www.brepurposed.com/wp-content/uploads/2023/03/diy-shelf-with-corbels.png)
Begin by clamping two corbels collectively. Make certain they’re aligned the right manner (ie. the brackets on the again are going through the identical manner). Eye ball the middle space of your corbel the place you need the pipe to go and drill down as straight as you’ll be able to by means of each corbels.
When you’ve carried out the primary two, take one among them and place it on prime of a non drilled corbel. Use this as a template to drill into the one beneath. Repeat till all corbels have been drilled by means of.
STEP 5
Now that every one your wooden is reduce and prepared it’s time to stain. I used a wooden conditioner first which helps to eradicate splotching and offers you a pleasant even end. You possibly can apply this with a black foam brush.
![DIY Wood Shelf with Rail](https://www.brepurposed.com/wp-content/uploads/2023/03/diy-wood-shelf-with-rail.png)
Then I used my favourite Darkish Walnut Gel Stain to stain all the things. I used a staining pad for the precise shelf and corbels after which used a small craft paint brush for the finials. Then I wiped the finials off on a rag to take away the surplus.
STEP 6
As soon as the stain is dry, apply a prime coat. I used Common Finishes Excessive Efficiency High Coat in Satin and solely did one coat since this isn’t going to get a whole lot of motion 😉
STEP 7
Minimize your copper pipe. Earlier than you chop, measure out the size you want by inserting the 2 finish corbels on the wall. This offers you a extra exact measurement however you do have some wiggle room because the pipe will sit an inch or so into the corbels.
We determined to have the pipe go right through all 5 corbels in a single piece however you would additionally reduce the pipe into sections and have the seams be hidden throughout the corbels.
Slicing copper pipe is tremendous simple with this little pipe cutter you will get on the dwelling enchancment retailer.
STEP 8
Spray paint your pipe. I used this gold leaf spray paint after which this clear coat on prime of that.
![DIY Hanging Brass Rail](https://www.brepurposed.com/wp-content/uploads/2023/03/diy-hanging-brass-rail.png)
STEP 9
Create your wooden gallery rail! Glue your finials into the holes you drilled after which glue the nook spherical on prime. This DAP Speedy Fuse glue is my favourite. It dries tremendous fast and is so sturdy!
![Wood Gallery Rail Shelf](https://www.brepurposed.com/wp-content/uploads/2023/03/wood-gallery-rail-shelf-1.png)
STEP 10
Cling your shelf! Pull the pipe by means of the corbels and hook the corbels onto the screws within the wall. We had been in a position to make use of a number of the current holes that had been there already after which needed to drill new holes on both finish. To drill into tile, simply be sure to use a masonry bit!
![Shelf with Brass Rail](https://www.brepurposed.com/wp-content/uploads/2023/03/shelf-with-brass-rail.png)
We had a bit of bother getting all 5 corbels to slip into BOTH screws for every one so we ended up solely utilizing one screw per corbel and it was nonetheless tremendous sturdy.
STEP 11
Spray paint your hooks to match the pipe. No matter colour you spray your pipe, be sure to use the identical on your hooks in the event that they aren’t a great match. I used these bathe hooks and love the little ball element they’ve.
Now it’s the enjoyable half – time to embellish and revel in your shelf!
![Vintage Modern Laundry Room](https://www.brepurposed.com/wp-content/uploads/2023/03/vintage-modern-laundry-room.png)
![DIY Wood Gallery Rail](https://www.brepurposed.com/wp-content/uploads/2023/03/diy-wood-gallery-rail.png)
![Vintage Cozy Laundry Room](https://www.brepurposed.com/wp-content/uploads/2023/03/vintage-cozy-laundry-room.png)
This wooden gallery rail shelf feels SO a lot better than the unique one did on this area. I like that it fills up the entire size of the wall and has the extra brass rail beneath to hold issues from. It’s additionally lots prettier and added a stunning contact of attraction and character to our laundry room.
What do you suppose? Would you construct your personal shelf with a wooden gallery rail?
Associated
[ad_2]